Sim2 C3X1080 Manuel d'utilisateur télécharger pdf (Page 14)

C3X 1080

ENGLISH

signal. When the input signal aspect ratio is 4:3 black verti-

cal bands are displayed on each side of the picture.

ANAMORPHIC:

correctly displays a 16:9 image.

LETTERBOX:

serves to display a 4:3 letterbox image (with

source signal with black bands above and below the

picture) so that it fills the 16:9 screen and maintains the

correct aspect ratio.

PANORAMIC:

widens the 4:3 image and cuts off a strip from

the top and bottom. Panoramic is ideal for displaying a

4:3 image on the 16:9 screen of the Display.

SUBTITLES:

raises the image, thus making space for subtitles.

PIXEL TO PIXEL

: performs pixel to pixel mapping of any image,

without adapting to the screen. The image is projected in

the centre of the screen and if it’s horizontal and/or vertical

dimensions are smaller than the display, it is bordered by

vertical and/or horizontal black bands.

USER 1, 2, 3

: use this option if none of the others are satisfac-

tory. User aspects permit you to continuously adjust the

picture size horizontally and vertically.

With progressive HDMI signals, for all resolutions, “User”

adjustment can be used only in decreasing mode: the

increment mode is intentionally set to value “0”.

COLOUR TEMPERATURE

Changes the colour balance of the image.

You can adjust the primary colours (red, green, blue) by

using 5 default settings.

The default settings are:

NATIVE (the projector’s native primary colours)

HDTV, EBU, SMPTE-C, primary colours defined by the

standards

AUTO, a mode that applies one of the standard settings

described above.

PC, a mode that is available only if instructions regarding

the colour temperature have been sent to the projector

by a PC using the Live Colors Calibration software.

For each of the settings listed in column “1 RGB” there are

9 default white balance adjustments.

IMAGE

This menu features adjustments relating to picture position,

aspect ratio, magnification etc.

ASPECT

This adjustment allows you to change the dimensions and

aspect ratio (relationship between width and height) of the

displayed image. There are five preset aspects available

and three personalised aspects (with user-settable param-

eters). You can select a different aspect for each source:

the selected aspect ratio will be automatically applied

the next time the source concerned is used.

You can also select the required aspect ratio by repeatedly

pressing the key

, or by pressing and a number

key (1...8).The following aspects are available:

NORMAL:

projects the image occupying the full height of

the screen while maintaining the aspect ratio of the input

Position

Aspect

Video

S-Video

RGBS

YCrCb

RGB Grafico

RGBS 15kHz

YCrCb 15kHz

!DJUSTMENTS

)NPUTS

Frequency

Phase

Gamma Correction

Colour Temperature

Y/C Delay

Overscan

DVI-D

HDMI™

Colour Temperature

Gamma Correction

Position

Overscan

Y/C Delay

Aspect

)MAGE

Normal

Anamorphic

Letterbox

Panoramic

Pixel to pixel

User 1

User 2

User 3

Fig.22b

Colour Temperature

Gamma Correction

Position

Y/C Delay

Overscan

Aspect

)MAGE

Fig.22a

Native

HDTV

EBU

SMPTE-C

AUTO

Standard

High

T= 7500 K

White: x = 0,296

y = 0,325

Red: x = 0,653

y = 0,293

Green: x = 0,323

y = 0,653

Blue: x = 0,113

y = 0,033

= 0.009

Medium

Low

Native

D70

D65

D55

User

Image

R G B

White

Color Information

Fig.23

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 28 29

Commentaires sur ces manuels

Pas de commentaire

Sim2 C3X1080 Manuel d'utilisateur Page 14

Commentaires sur ces manuels

Produits connexes et manuels pour Projecteurs Sim2 C3X1080