Sim2 C3X1080 Manuel d'utilisateur télécharger pdf (Page 18)

C3X 1080

ENGLISH

The screen has six options, one for each line, and two

columns indicating the keys F1-F2. You can select F1 and

F2 with the keys ◀ and ▶ on the remote control; select the

function to assign to F1 or F2 with the keys ▼ and ▲.

The function performed by the key is confirmed by the

appearance of a dot on the corresponding column-row

intersection.

ZOOM

Controls the motorised lens zoom, permitting you to zoom

in or out, enlarging or shrinking the projected image.

By pressing the ● button on the remote control next to the

menu (zoom/focus) you can display a pattern that aids

zoom/focus operations.

This permits you to access the optic zoom control, where

the ◀ and ▶ keys zoom in and out.

ENLARGEMENT

Activates the electronic zoom, the keys ◀ and ▶ zoom

in on the image. If you press the key again you will enter

PAN mode in which the ◀ and ▶, ▼ and ▲ keys enable

you to pan over the enlarged image. When the ▼ key is

pressed a third time, the system resets the projector to

original viewing setting.

BLANK

Switches off the video signal and displays a black screen.

As soon as the key is pressed an OSD message lasting a

few seconds confirms that the function has been acti-

vated. You can restore the previous conditions by pressing

any key on the remote control.

GAMMA CORRECTION

Successive pressing of the key in question (F1 or F2) makes

it possible to select any of the available gamma curves.

SOURCE INFORMATION

When active (YES) each time the source is changed infor-

mation regarding the signal type is displayed. If inactive,

(NO) no information on the source is displayed.

OSD BACKGROUND

Determines the type of background for the On Screen

Display (opaque transparent).

OSD TIMEOUT

Determines the On Screen Display timeout after the last

event (adjustment using remote control or keypad). The

adjustment is made using the ◀ (decrease) and ▶ (in-

crease) keys within a 6-200 second timeframe.

OSD POSITION

Positions the On Screen Display in a particular area of the

projected image. The OSD can be positioned using the

arrow keys for fine adjustments or keys 1...9 on the remote

control to select one of 9 preset positions.

MEMORIES

The main picture parameters can be saved in discrete

sets of values called Memories so that they can be subse-

quently applied as a group using a single command.

There are 6 separate Memories (Memory 1, Memory 2,

Memory 3) for each of the 8 signal types handled:

making a total of 48 different available Memories.

The following image parameters can be saved/recalled

by the Memory Management system:

Image Picture

BRIGHTNESS ASPECT

CONTRAST COLOUR TEMPERATURE

COLOUR OVERSCAN

TINT GAMMA

SHARPNESS

FILTER

NOISE REDUCTION

Some of these parameters may not be available for

certain inputs or certain input signals, as indicated in

Tables 4 and 5. The Memory Management function

menu page is activated by pressing the

key on the

remote control.

Fig.33

SAVE MEMORY

To save the current image settings in Memory 1, move

the cursor to line 1 using the ▼ and ▲ ‚ keys and open

the drop-down menu by pressing the ◀ key (Fig. 32).

Select the “Save initial settings” line. The message, “Initial

settings saving in Memory 1” will be shown at the bottom

of the display to confirm that the operation has been

completed. Repeat the operation to save other image

settings in new memories.

Fig.34

0 Auto

3 S MEMORIA 1

-EMORIES

Save current settings

Save initial settings

Rename

2 I

1 S

232)

GRAPHICS RGB

S-VIDEO

AUDIO OUT

HDMI 1

REMOTE

S-VIDEO

ESC

INPUT

HDMI 2

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 28 29

Commentaires sur ces manuels

Pas de commentaire

Sim2 C3X1080 Manuel d'utilisateur Page 18

Commentaires sur ces manuels

Produits connexes et manuels pour Projecteurs Sim2 C3X1080